Port d'injection pour sac de culture
Micropore
Port d'injection
Port d'injection pour sac de culture
Micropore
Port d'injection

Adhesive Injection Port 18mm

  • Ease of use: Adhesive injection ports allow liquid cultures to be injected without having to open the container, reducing the risk of contamination.
  • Cleanliness: the self-healing material of the injection ports closes after passing the needle, which helps protect the culture medium from contamination.
  • Durability: Injection ports are made with strong 3M adhesive and are waterproof, making them resistant to harsh conditions. In addition, they are fully autoclavable and resistant to temperatures above 121°.
  • Ease of application: It is easy to apply the injection ports to jar lids or grow bags. Simply clean the surface where you are going to stick the port, peel the port from the foil and apply it to the bag or jar. Remember to always clean the port with 70% alcohol before inserting a needle.
€6,00 Sale
- +

Description

Perfect for injecting liquid cultures with a syringe into a jar or sterilized grain bag. In this way, you no longer even have to open the container and you thus limit the risk of contamination.

Adhesive injector ports can be applied to jar lids or culture bags so that you can inject and collect mycelia in liquid cultures, while protecting your environment from contamination (mold, bacteria, yeast).

  • Time saving and cleanliness compared to techniques with silicone
  • Self-healing material. It closes after passing the needle.
  • Made with strong 3M adhesive
  • Raincoat
  • Fully autoclavable, it resists temperatures above 121°.
  • Origin: U.S.A.

 

Use

 

With a Unicorn bag:

Clean the surface where you will glue the injection port.

Peel the injection port from the foil and apply it to the bag or jar.

Note: Always clean the port with 70% alcohol before inserting a needle.

 

With a jar:

Drill a cover with a +-5mm drill bit. Place an adhesive filter, pressing firmly on the edges to make it adhere.

Tip for sterilizing in pressure cookers:

Do not close the lids completely. Leave a small gap which will allow the steam to escape, otherwise the filters risk coming loose under the internal pressure. This also helps prevent the formation of a “vacuum” during cooling, which can damage the filters. Cooling must be done in the cleanest environment possible to avoid contamination. Only open the pressure cooker when the temperature has cooled to room temperature, and close the lids securely at that time. If possible work with it in front of a laminar flow.

Adhesive Injection Port 18mm

Adhesive Injection Port 18mm
- +

Start typing and press Enter to search