Inkbird ITC-308 Temperature Controller

This digital thermostat will allow you to control a temperature with precision. It can be used in culture rooms, incubation rooms, for pasteurization, cooking, etc.

You configure the temperature you want to reach, as well as a range around this temperature (+ or - 1 degree for example).

The double socket allows you to connect a heater on one side and, if necessary, a cooling system on the other.

Specificities

• Dual relay socket, you can plug in heating and cooling at the same time, Thermostat with Probe Easy to Use; Total power is 1100W / 110V, 2200W / 220V. Power cable length: 1.5 m.
  
• NTC probe in stainless steel (IP68). Cable length: 2 m.
  
• Thermostat Temperature Range: -50 ~ 120°C; Accuracy: 0.1°C; Storage Temperature: -20 ~ 60°C; Warranty: 1 year.
• Alarm function: you can set an alarm for a certain minimum and maximum temperature to warn you of overheating, for example. The device will also indicate an alarm sound in the event of a fault.
  
• Calibration. If the temperature of the probe changes over time, you always have the option of calibrating it.
• Instructions for use included, downloadable here . CE certification
  

Recommendations

- Place the probe in a good location in your room. If your space is poorly ventilated, or the internal air circulation is insufficient, air pockets can form in your space, which distort the temperature measurements.

- Having another thermometer allows you to compare the measurements and if necessary calibrate the device.