Inkbird IHC-200 Humidity Controller

This hygrostat will allow you to automatically and precisely control the humidity level in your grow rooms. Easy to use, you set the humidity range that suits you, and plug your humidifier into the socket.

Specifications

• - 2 Dual Relay 220V Outlets: one for humidification and the other for dehumidification as needed. Total Power: 10A, 2200W/220V
• - External humidity probe connected by a 2m cable. Humidity measurement range: 5 ~ 99%RH. Humidity control range: 10 ~99%RH
• - You can set minimum and maximum humidity values, as well as an alarm in case the defined levels are exceeded.
  
• - Calibration possible if necessary.
• - User manual downloadable here.

Recommendations

- Place the probe in a suitable location in your room. If your space is poorly ventilated or the internal air circulation is insufficient, air pockets can form in your space, distorting humidity readings.

- Having another portable humidity sensor allows you to compare readings and calibrate the device if necessary.

- The probe cannot get wet. Avoid placing it in areas of moisture accumulation, and avoid wetting the probe during cleaning, for example. If the probe is not working correctly, we recommend drying it for a few hours. If it still does not work properly, you can try dipping it in isopropanol for a few seconds, and then drying it again. In case of a faulty probe, it is possible to get a replacement probe.